Just Answer

Ask Your Motorcycle Question. Motorcycle Experts Answer You ASAP
(Not a Motorcycle Question?)

Question

1978 GL1000, headlight will not come on. Turn signals, ...


Sent to Motorcycle Experts April 08 7:51 p.m.

1978 GL1000, headlight will not come on. Turn signals, brake lights are OK. Replaced headlight, still nothing. New right hand control switch also.

Optional Information:
1978 Honda GL1000 999cc

Already Tried:
replaced headlight, replaced start / kill switch
Customer (name blocked for privacy)
Status: Closed   Value: $9   
Answer
April 08 9:57 p.m. (2 hours and 6 minutes later)

THIS ANSWER IS LOCKED!
You can view this answer by clicking here to Register or Login and paying $3.
PictureSki Doctor  -- top level A-technician -- 96% Positive Feedback on 136 Motorcycle Accepts
over 5 years double time experience, excellent electrical and mechanical diagnosis
Reply
Sent April 09 5:34 p.m. (19 hours and 36 minutes later)

No voltage to the headlamp. Fuse for headlamp is good. Also replaced relays. There is a hi and low beam switch on the left hand control bar as well as a turn signal switch and horn. Is there a way to test this switch? or just replace it if I can find one.


Thanks

George
Customer (name blocked for privacy)
Info Request
April 09 5:53 p.m. (19 minutes and 42 seconds later)

see if you get voltage to the headlamp hi/low beam..do you get voltage at the fuse?

PictureSki Doctor  -- top level A-technician -- 96% Positive Feedback on 136 Motorcycle Accepts
over 5 years double time experience, excellent electrical and mechanical diagnosis
Reply
Sent April 09 7:06 p.m. (1 hour and 12 minutes later)

No voltage to headlamp socket. 3.2 volts at fuse for headlamp. I pulled fuse out for accesaries while bike running and it stalled. Put it back in and fired right back up. I wiil have to take apart the left control switch to test it.



Later
Customer (name blocked for privacy)
Answer
April 09 8:45 p.m. (1 hour and 39 minutes later)
ACCEPTED Check Mark

if you have 3.2 volts at the fuse, you already have an issue...make sure that circuit gets at least its supplied 11 - 12 volts current
PictureSki Doctor  -- top level A-technician -- 96% Positive Feedback on 136 Motorcycle Accepts
over 5 years double time experience, excellent electrical and mechanical diagnosis

Think you can answer this question?
 Login or  Become an Expert









DISCLAIMER: You acknowledge that any information you may obtain from individuals you contact through use of the Just Answer service comes from those individuals, not from Just Answer!, and that Just Answer is not in any way responsible for any of the information these third parties may supply. The site and services are provided "as is" with no warranty and no representations are made regarding the qualification of an Expert. Responses and comments on Just Answer! are for general information and are not intended to substitute for informed professional advice (such as medical, legal, investment or accounting) and do not establish a professional-client relationship. Just Answer! is not intended or designed to address EMERGENCY QUESTIONS which should be directed immediately by telephone or in-person to qualified professionals. Please carefully read the Terms of Service.
   Just Answer! > Motorcycle Repair Advice, Service and Troubleshooting